Entry/Exit Port Slider Replacement Guide
9
4.
Look at the bottom of the library where the drives are located. If there is a hinge
connecting the left side of the drive slots to the back of the library (Figure 5),
proceed to Step 5.
If your library does
not
have a hinge (Figure 6), proceed to Step 6.
5.
Using the appropriate screwdriver, loosen the screws just enough to move the gate
out of the way from the robotic rack assembly (Figure 7).
• Some Spectra 12K libraries have three screws in the gate, and some units will
not have any screws in the gate.
• The Spectra 64K library has five screws in the gate.
Figure 5
A library with a hinge.
Figure 6
A library without a hinge.
Figure 7
The drive slot gate (Spectra 64K library shown).
