11
Spectra 10K Library Preventative Maintenance Guide
11.
Before re-installing the carousel, make sure that the SCSI ribbon cable is not pinched
or twisted, and that it stays out of the way of the carousel.
12.
Re-install the carousel, making sure that all drives and cables are out of the way.
Caution:
Make sure that the door cable is not pinched between the carousel
and the base plate or UCM board (see the pictures below).
13.
Slide the drives back to their original positions next to the carousel and tighten all
of the captive screws.
Note:
Remember that there are eight thumbscrews for the carousel and
two screws each for the drives. If necessary, reference the diagram
on page 9.
14.
Proceed to
Door cable pinched by carousel.
Door cable free to move.
