P
OINT
CTRL
V
IRTUAL
R
EALITY
C
ONTROL
D
EVICE
E
DGE
C
ALIBRATION
L
EFT AND
R
IGHT
E
DGE
Step 3
Select a point in the cockpit where you will be
manipulating most of your controls and center
it in your field of view and point at it.
Finger and Cursor should line up
Step 4
While keeping your hand in the same location,
move your head slowly left or right until the
cursor reaches the edge of your view. Observe
if the cursor has moved left or right from its
original location.
Move Cursor Left
Move Cursor Right
Advance to Next Step
Upper Edge Cursor Alignment
24
Step 5
Keeping your head and hand in the
same stationary position, adjust the
lateral cursor location with the FCU
buttons until it returns to its original
location centered on the MFD .
Press FCU button 3 when done.
If cursor moved here
as head was rotated…
…with out moving you head or
hand ,move cursor back here
by pressing FCU Button 2
Center MFD in FOV
and Point at it
