P
OINT
CTRL
V
IRTUAL
R
EALITY
C
ONTROL
D
EVICE
E
DGE
C
ALIBRATION
Edge Calibration is just what the name implies. We are
only adjusting the Finger to Cursor alignment at the
edges of our view without effecting the center
alignment.
The left and right Finger to Cursor Alignment is done in
one step because of the symmetrical bio-mechanics
between the FCU finger and the HMS.
(left and right edge movement is mirrored)
The upper and lower edges are adjusted separately
because of the asymmetric biomechanics of raising and
lowering the arms in relation to the FCU finger and the
HMS.
(up and down movement is not the same)
When properly executed, edge calibration will enable
the cursor to stay in the same location in the cockpit
when the head is slowly moved left, right, up, or down,
while the finger or FCU is stationary.
Note: While PointCTRL processes and sends mouse
commands at 200 FPS there is a short lag in V/R when
the head is moved quickly . This is followed by the
cursors quickly settling back down to its intended
position. (Looking into WMR implementation for solution)
Step 2
Navigate to the Edge Calibration Mode
(4 Cursor Starburst)
and Press FCU Button 3
V/R Head Set View
Menu Left
Displays Next
Graphic Menu Item
Menu Right
Displays Next
Graphic Menu Item
Select
Enters the Menu
Setting Item
Step 1
Enter User Settings Menu
While in Cockpit View
Press and Hold BTN2
(Right) for 3 seconds
23
HMS ON/OFF
Toggle
Do not press
