Speco VIP2P1 Скачать руководство пользователя страница 3

Страница: 3 / 72

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

FCC INFORMATION :

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

CAUTION :

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Содержание VIP2P1









































































Результаты поиска

Содержание VIP2P1

Отзывы:

Похожие инструкции для VIP2P1

Бренды по названию

Популярные бренды

Speco VIP2P1, Инструкция по эксплуатации

Результаты поиска

Содержание VIP2P1

Отзывы:

Похожие инструкции для VIP2P1

Бренды по названию

Популярные бренды