O
O
2
2
i
i
B
B
D
D
2
2
U
U
s
s
e
e
r
r
’
’
s
s
G
G
u
u
i
i
d
d
e
e
Rev.1.0 (Oct. 2015)
21
Appendix A – Important Notice in Exchanging SD Card (Micro SD)
SD Card is a non-volatile memory device for storing video and audio data on the product. Note that continuous recording
to the SD Card will cause the memory cell to wear out, eventually resulting in failure.
When you plug out the SD Card for replacement or other purpose, follow the steps below in order to prevent data loss or
crash of the SD Card.
1.
Press factory default button for 1 sec to unmount the SD Card .
SD Card can also be unmounted by going to
Admin Page -> Sensor&Capture Setup and clicking on
CONFIRM button at the right of SD Card Unmount menu.
2.
Unplug the SD Card .
If no action is taken within 1 minute, SD Card will be mounted again.
3.
Plug in new SD Card
4.
If the SD Card is a new one for the IP camera, format the SD Card by following through the steps below.
Go to Admin Page -> Sensor & Capture Setup
In the SD Card management menu, click on
CONFIRM
button at the right of SD Card Format.
For more detailed information regarding connection to admin page,
please refer to the “
Configuration Guide
”.
