Record & Disk Management
NVR User Manual
37
RAID
① Enable RAID
(Go to Start
Settings
Disk
Disk Mode)
② Create an array. (Go to Start
Settings
Disk
Physical Disk)
a. Click “Physical Disk” tab and then click “Create an array”.
b. Enter the user name and password which has the authority of Disk Management. If you don’t have one, you can use the user name and password
that you login system (the default username: admin; the default password:123456).
c. Enter array name and select array type (like RAID5).
d. Select physical disk.
If you have 16 disks, please check 15 disks. The remaining one should be set to a hot spare.
If higher data security is needed, you can decrease physic disks and increase hot spare disks. Please set them as needed.
e. Select a hot spare. In the physical disk interface, select the disk that is not in the array and click
as shown in the following pictures.
a
C
b