1. OSD setup under BNC input mode (continued)
D. MISC
Press the MENU button to bring the menu on screen,
and then
Up
/
Down
buttons to move left and right
across the menu selections to highlight the MISC
menu. Press the Menu (Source) button to enter the
(highlighted) MISC sub menu.
Each additional press of the Menu/Source button
moves the yellow highlighted sub-menu selection
downward, moving from the bottom selection back to
the top of the sub-menu. Pressing the
Up
/
Down
buttons will adjust the value of the highlighted item.
Press the MENU button to save the values. Press
EXIT to exit the sub-menu, and go back to the main
menu choices.
Pressing the EXIT button while at the top level will
close the menu and return to normal operations.
Adjustments
Factory Reset:
Reset all settings back to default factory settings.
Signal Source:
Choose between a BNC input or a VGA input source.
Display Ratio:
Adjusts the dimensions of the display.
1
1 …………………………………………………………………………… INSTRUCTION MANUAL
4 :
3
