83
channel.
o
FRAME RATE
: Sets the recording rate.
o
QUALITY
: Sets the image quality in 5 levels.
o
RECORDING MODE
: Sets the recording mode.
o
RECORD DAYS
: By the setting value, the Recording Days will change accordingly.
7-7-4. Device
Select
Device
to set Spot Out, Enable/Disable CVBS Out, motion zone.
ALARM OUT:
Set the sensor, motion, and video loss for triggering alarm relay.
HDD Error and Video Loss can be set for triggering a beeping sound
The following settings can be changed to trigger an alarm output.
o
ALARM DURATION
DIGITAL DETERRENT:
The schedule of digital deterrent can be set and a sound file can be
uploaded to the HT.
To set up schedule, select
CHANNEL >
select
SOUND TYPE >
select
Area.
CONTROLLER:
Set the controller baud rate and ID.
PTZ:
Set the PTZ baud rate, protocol, and ID.
SPOT OUT:
o
SPOT ON EVENT:
Enable/disable channel change if an event occurs on a channel
o
SEQUENCE:
Enable/disable sequential display of spot channel in full screen
o
SPOT CHANNEL:
Select a channel for spot monitoring using the mouse or the remote control
and press OK button
MOTION: Setup the motion detection area and the sensitivity.
o
SITE: Select the channel
o
MOTION ZONE:
FULL Zone or PARTIAL Zone
o
MOTION SENSITIVITY:
1~9 (High sensitivity level)