Speco D16HT, Руководство пользователя, Страница: 82 / 108

82
o
MOTION DETECTION : Enable Email Notification when the camera detects motion
o
VIDEO LOSS: Enable Email, Beep and Alarm output Notification when the camera signal is
lost.
o
HDD TEMPERATURE : Enable Email Beep and Alarm output Notification when the HDD
reaches the maximum temperature
o
HDD BAD SECTOR: Enable Email Notification when the HDD has bad sectors.
o
HDD ALMOST FULL: Enable Email Notification when the HDD is almost full.
o
HDD FULL: Enable Email Notification when the HDD is full.
o
HDD FAILURE: Enable Email, Beep and Alarm output Notification when the HDD fails.
7-7-3. Record
Select RECORD tab to set the recording conditions.
These settings apply to the specified channel only.

Recording Setup
o
RESOLUTION : Sets the resolution for the recordings. The set value applies to an individual
channel.
o
FRAME RATE : Sets the recording rate.
o
QUALITY : Sets the image quality in 5 levels.
o
RECORDING : Sets the recording mode.
o
RECORDING MODE: CONTINUOS, SCHEDULE, MOTION, SENSOR
o
PRE RECORD : Sets whether to perform or not pre-recording.
o
POSE EVENT RECORD : Sets the duration of the event recording.
o
AUDIO : Sets whether to perform or not audio recording.
o
SECHDULE : Sets the schedule recording.
These settings apply to all channels.

EZRECORD
o
RESOLUTION : Sets the resolution for the recordings. The set value applies to an individual