Speck SSM-24, Руководство по эксплуатации, Страница: 12 / 61

This three rack space module incorporates 28 stereo or mono assign
banks, 8 master outputs, 8 stereo effects returns, a complete monitoring
section, and a stereo grand master feed.
Any mono or stereo input channel from the Model SSM may be
assigned to any of eight buss outputs. The eight busses may be used as
individual outputs or as stereo groups. The eight busses have an
associated level control and may be muted with a master kill switch. The
8x2 monitor section provides an isolated solo capable mix of the eight
busses to the SSM for complete monitoring flexibility. Eight stereo
effects returns may be used in conjunction with, or in addition to the
SSM's existing effects returns.
Mono input channels are available with microphone preamps as an
option. Channels with mike preamps incorporate a high quality
microphone transformer, a XL type input connector, and a Mike/Synth
select switch. Any quantity may be ordered and may be installed in any
input position of the Main Unit or the Expander. Mike preamps are not
available on stereo input channels.
The SSM main unit or 16 channel Expander may be fitted with an
optional rack mount slide and tilt mechanism in place of the standard
vertical mount rack adapters.
The slide/tilt option will allow the SSM to be mounted flat, like a sliding
drawer, and moved in and out of a standard 19" equipment rack. When
moved to the front of the rack, the mixer may be tilted and locked into a
0, 45 or 90 degree position. For traveling, the mixer may then be pushed
back into the rack in its flat horizontal position.
An optional wire harness is available to connect the Model SSM to a
stereo volume pedal (not available from Speck). This 20' harness is
wired with a 6 pin DIN connector at one end and four 1/4" plugs at the
other end. The use of the expression pedal allows the operator a "What
you hear, is what you get" master volume control adjustment from the
stereo program, monitor and headphone outputs of the SSM.
Microphone preamps
Rack mount Slide/Tilt adapter
Expression pedal harness
7 Chapter 1 Introduction Section