Safety
10 EN
04/2019
– The personnel have read this manual and understand the
necessary working steps.
2.3 Safety
regulations
The operator of the system is responsible for the adherence to all
relevant statutory regulations and guidelines.
Observe the following regulations when using the pump/unit:
– This
manual
– Warning and information signs on the product
– Other
applicable
documents
– The valid national regulations for accident prevention
– The internal occupational, operational and safety
regulations of the operator
2.4 Protective
equipment
Reaching into moving parts, e.g. coupling and/or impeller fan, can
cause serious injury.
Never operate the pump/unit without protective covers.
2.5
Structural modifications and spare parts
Alterations or modifications can affect operational safety.
Never modify or alter the pump/unit without the
manufacturer's permission.
Only use original spare parts and accessories authorised by
the manufacturer.
2.6 Signs
Ensure that all the signs on the complete pump/unit remain
legible.
2.7 Residual
risk
2.7.1 Falling
parts
The lifting hooks on the motor are designed for the weight of the
motor. The lifting hooks can break if the complete pump unit is
attached.
Attach the pump unit consisting of motor, pump and filter
housing (where necessary) on both the motor and the pump
sides. See point 4.2 on page 17
Only use hoisting and load-bearing equipment which is
suitable and technically sound.
Do
not
stand
under suspended loads.
