![background image](http://html1.mh-extra.com/html/speck-pumps/badu-ecom2-s90/badu-ecom2-s90_installation-operating-and-service-manual_1341830019.webp)
1
M017837080000 REV. January 19, 2011
2EZ Speed
TM
Pool Motor with Programmable Control/Timer
M017837080000 REV. January 19, 2011
11
2EZ Speed
TM
Pool Motor with Programmable Control/Timer
A Setting the Clock and Day
• Press Menu
– Clock Flashing
– Press Enter
– Hour Digits will be Flashing
– Use Up/Down
to adjust the digits
– Use Side to Side
to Navigate thru the fields
to adjust minutes as well as AM/PM
– Select current Day of the Week by using
the up/down arrows
– Press Enter to complete and proceed to setting speeds
1 : AM
MTuWThFSaSu
Program
Press Enter to Con rm
Set Clock
MEnu
EnTEr
B Programming Speeds
• While in Menu
– Low will be Blinking
– MTuWThF will be illuminated
– Set On Time is illuminated
– Press Enter
– Use Up/Down
to Change Time On for Low Speed
Monday thru Friday
– Use Side to Side
to Navigate
– Press Enter
– MTuWThF will be illuminated
– Set Off Time is illuminated
– Use Up/Down
to Change Time Off for Low Speed
Monday thru Friday
– Use Side to Side
to Navigate
– Press Enter
– Programming Monday-Friday High Speed
• Same as above except High will be illuminated
– Programming Saturday/Sunday Low Speed
• Same as above except Days of Week will read SaSu
– Programming Saturday/Sunday High Speed
• Same as above except Days of Week will read SaSu
and High will be illuminated
Low
1 : AM
MTuWThF
Program
Press Enter to Con rm
Set on Time
MEnu
EnTEr
High
1 : AM
MTuWThF
Program
Press Enter to Con rm
Set off Time
MEnu
EnTEr
How to Program your 2EZ Speed
TM
Control
uick Start
How to Program Detail
ee ui tart i esired
Factory Settings
Timer is preset with the following factory default settings.
Monday thru Friday Low Speed Setting
Time On: 7:00 A.M.
Time Off: 2:00 P.M.
Monday thru Friday High Speed Setting
Time On: 8:00 P.M.
Time Off: 12:00 A.M.
Saturday-Sunday Low Speed Setting
Time On: 8:00 A.M.
Time Off: 4:00 P.M.
Saturday-Sunday High Speed Setting
Time On: 8:00 P.M.
Time Off: 12:00 A.M.
restore Factory Defaults
The preset factory settings above can be restored at any
time. To change the program settings back to their factory
default settings:
1.
While in STOP mode, press the enter button for
5 seconds Verify Press ENTER to confirm appears
in the display.
2.
Press ENTER again if you want to return to factory
settings.
noTE:
After ENTER is pressed, the motor
will adjust and run according to the factory default
settings. All prior programmed settings (user defined)
will be lost.
Setting A user Program
Press the MENU button to enter the MENU mode you will
be guided through a sequential menu selection: (Please
use
keys to navigate and
keys to change data.)
A. Set Clock and Day of Week
, press ENTER
Set Hours/Minutes/AM/PM and day of the week.
Days of the Week are denoted by MTuWThFSaSu
(M Monday, Tu Tuesday, W Wednesday,
Th Thursday, F Friday, Sa Saturday, Su Sunday)
Once correct day of the week is chosen, press ENTER
B.
Set
Low
Speed
on
Time (
Monday thru Friday
)
LOW will be flashing, Press ENTER. Set desired
“on” time for motor to begin running on low speed.
Use
keys to Navigate through each of the fields.
The flashing field is the active field. Using the
keys to adjust the time as desired for the low speed to
turn on. Pressing ENTER will finalize your selections.
noTE: In each Low or High Setting the user can
select the off position when selecting the hour.
off resides between the hours of 12 and 1. If off
is selected that setting will then be ignored.
C.
Set
Low
Speed
off
Time (
Monday thru Friday
)-
LOW will be flashing. Set desired “off” time for motor
to stop running on low speed. Use
keys to
navigate through each of the fields. The flashing field
is the active field. Using the
keys, adjust the time
as desired for the low speed to turn off. Pressing
ENTER will finalize your selections.
D.
Set
High
Speed
on
Time (
Monday thru Friday
)
HIGH will be flashing, Press ENTER Set desired “on”
time for motor to begin running on high speed. Use
keys to navigate through each of the fields. The
flashing field is the active field. Using the
keys
adjust the time as desired for the high speed to turn
on. Pressing ENTER will finalize your selections.
E.
Set
High
Speed
off
Time (
Monday thru Friday
)
HIGH will be flashing. Set desired “off” time for motor
to stop running on high speed. Use
keys to
navigate through each of the fields. The flashing field
is the active field. Using the
keys, adjust the time
as desired for the high speed to turn off. Pressing
ENTER will finalize your selections.
F.
Set
Low
Speed
on
Time (
Saturday and Sunday
)
Press ENTER Set desired “on” time for motor to begin
running on low speed. Use
keys to navigate
through each of the fields. The flashing field is the
active field. Using the
keys adjust the time as
desired for the low speed to turn on. Pressing ENTER
will finalize your selections.
G.
Set
Low
Speed
off
Time (
Saturday and Sunday
)
Set desired “off” time for motor to stop running on low
speed. Use
keys to navigate through each of the
fields. The flashing field is the active field. Using the
keys, adjust the time as desired for the low speed to
turn off. Pressing ENTER will finalize your selections.
C using Low and High Speed override
• The user can press either the Low or High Speed Override
button at any time.
– 60 Minutes will appear on the clock and begin to countdown
– Pressing the Override button again will Exit from the
override selection and user programming will resume.
– When the 60 minute timer reaches zero, the unit will exit
from override mode and user programming will resume
Low
Program
override
LoW SPEED
o ErrIDE
HIGH SPEED
o ErrIDE
High
Program
override
Содержание BADU ECOM2/S90
Страница 1: ...Installation Operating and Service Manual BADU EcoM2 S90 Swimming Pool Pump...
Страница 27: ......
Страница 28: ......