COMPLETED COVER LIFTER
MOUNTING BRACKET
SLIDER PIVOT
BRACKET
HYDRAULIC ARM
PIVOT ARM
CORNER
SUPPORT
ARM
IMPORTANT!
ASSEMBLY OF PIVOT BRACKET AND HYDRAULIC ARM
CAUTION
:
DO NOT USE
the
UltraLift
in
windy
conditions. The spa cover
may blow over and impact the spa user.
middle of cover
STEP 5
support arms is advised. We recommend rotating the
STEP 6
pivot arms to the corner support arms using
-
STEP 7
Hydraulic arm assembly:
Open the spa cover to the upright position
ball studs to the outside of the hydraulic clamp and
and
ny-
lock nuts . Attach the larger end of the hydraulic arm to the ball
stud at
stud.
STEP 8
all
NOTE:
The J - pin is inserted into the pivot brackets and
through the round pivot arm when the spa cover is in the open
position for added safety and removed when the cover is to be
closed. When the cover is closed, the J - pin can be inserted into
“J - pin storage” for safe-keeping.
PIVOT ARM
D
HYDRAULIC ARM
MOUNTING BRACKET
SLIDER PIVOT BRACKET
J-PIN LOCK
J-PIN STORAGE
SELF TAPPING
C
B
Move the arm up until the end of the hydraulic arm meets the
ball stud and press it into place. NOTE: If you need to remove the
hydraulic arm, GENTLY pry the half-circle collar to release the
spring from the ball stud.
BALL STUD BRACKET
