Specialized TARMAC SL7, Руководство пользователя

Страница: 29 / 32

NO GAP
GAP
1
2
22
GAP
NO GAP
FIG. 22: Tighten the stem bolts.
WARNING! The Tarmac SL7 stem is designed with no gap between the stem
body and the faceplate at the upper bolt area. The upper bolts must be tightened
such that the faceplate bottoms out against the stem body before being torqued.
Failure to bottom out the faceplate against the stem body can result in
structural damage to the handlebar.
•
1
: Gradually torque the upper bolts to spec.
•
2
: Gradually torque the lower bolts, alternating from the left to right bolt to evenly increase the
torque until the spec is reached.
23a
FRONT BRAKE
1400mm Di2 WIRE
FROM FRAME
750mm Di2 WIRE
SHIFTER TO SHIFTER
REAR BRAKE
ELECTRONIC Di2 SHIFTING
FIG. 23a: Secure the brake housings under the stem (Electronic wired shifting).
• Install the stem cable bat to secure the brake housings and Di2 wire under the stem.
• Torque the stem cable bat bolt to 26.5 in-lbf / 3.0 Nm.