Specialized TARMAC SL7, Руководство пользователя

Страница: 20 / 32

17
9a
Di2 WIRE
REAR BRAKE
FRONT BRAKE
LOCATE FRONT
BRAKE HOUSING
AGAINST STEERER
TUBE WITH TAPE
UPPER TRANSITION
5/10mm SPACERS
LOWER TRANSITION
ALIGNMENT PINS
COMPRESSION RING
ELECTRONIC Di2 SHIFTING
FRONT BRAKE
SHIFT WIRE OR REAR BRAKE
7.1. AERO STEM
FIG. 9a: Install the transition and stack parts (Electronic wired shifting).
• Guide the brake housings and wire for Shimano Di2 through the respective holes of the lower transition
(
fig. 9a inset ), then guide them up through the front hole of the spacer stack and upper transition as
the transitions and spacers are being installed on the steerer tube.
• Guide the brake housings and Di2 wire forward into the notch in the upper transition, then install the
stem on the steerer tube.
9b
REAR BRAKE
REAR SHIFT
FRONT SHIFT
FRONT BRAKE
INVERTED (OPPOSITE)
BRAKE LEVER SETUP:
SWITCH REAR BRAKE
LOCATION IN
COMPRESSION RING
LOCATE FRONT
BRAKE HOUSING
AGAINST STEERER
TUBE WITH TAPE
UPPER TRANSITION
5/10mm SPACERS
LOWER TRANSITION
ALIGNMENT PINS
COMPRESSION RING
MECHANICAL SHIFTING
FIG. 9b:
Install the transition and stack parts (Mechanical shifting).
• Guide the brake housings through the respective holes of the lower transition, then guide them up
through the front hole of the spacer stack and upper transition as the transitions and spacers are being
installed on the steerer tube.
• Guide the shift housings through the holes on the outside of the transition. The shift housings can
go through either hole and can cross to the shifters (recommended) or go directly to each shifter
without crossing (
fig. 23b ).
• Guide the brake housings forward into the notch in the upper transition, then install the stem on the
steerer tube.