Specialized TARMAC SL7, Руководство пользователя

Страница: 25 / 32

22
WARNING! Burrs and sharp edges can damage the carbon and alloy surfaces
of the components. Any deep scratches or gouges in the stem or fork can
weaken the components.
WARNING! Specialized stems are specifically designed in conjunction with
Specialized forks with carbon steerer tubes to ensure proper load distribution.
Specialized recommends against the use of non-Specialized-branded stems
with large bore holes in contact with the steerer tube. Large bore holes reduce
the clamping surface area and may concentrate the load onto the carbon
steerer tube in an unsafe manner. If using a standard stem (instead of the
Tarmac SL7 stem), only use a standard slotted style stem. Do not use an
internal wedge clamp style stem, as internal wedge clamp stems can cause
damage to the steerer tube if improperly installed.
As we cannot test every combination, Specialized does not recommend the
use of non-Specialized branded stems with Specialized forks (carbon steerer
tubes) and Specialized Carbon steerer tube plugs, unless specified as original
equipment by Specialized.
WARNING! Do not apply grease or carbon assembly compound (carbon paste)
between the stem and the steerer tube, and do not twist the stem onto the
steerer tube. This can result in damage to the composite surface,which may
result in a catastrophic failure of the fork, resulting in serious personal injury
or death.
7.3. HANDLEBAR ASSEMBLY
15
DISPLAY MOUNT
LIGHT/CAMERA MOUNT
ACCESSORY MOUNT
FILLER PLATE
MOUNTING PLATE
MOUNTING BOLT
FIG. 15: Optional - Install the Specialized Accessory Mount.
The Specialized Accessory Mount is compatible with Bar Fly 4 accessory
adapters. The Accessory Mount plate allows two mounting positions,
depending on display size. The included adapters fit many of the more popular
display, light and camera mounts. Additional adapters are available at www.
barflybike.com .
CAUTION: The orientation of the mounting plate is critical to the structural
integrity of the stem and handlebar. If the plate is installed vertically, it will
not seat properly and can cause damage to the handlebar once torqued to
specification.
• Apply blue loctite to the mounting bolt, place the mounting plate horizontally inside the stem
faceplate and install the Accessory Mount on the stem faceplate. Once the angle of the Accessory
Mount is determined, torque to 24 in-lbf / 2.7 Nm.
• Install the chosen accessories then torque the bolts.