Specialized SIRRUS 1.0, Руководство пользователя

Страница: 8 / 13

8
6 . G E N E R A L N OT ES A B O UT A S S E M B LY
This user manual is not intended as a comprehensive use, service, repair, or maintenance
guide. Please see your Authorized Specialized Retailer for all service, repairs, or maintenance.
Your Authorized Specialized Retailer may also be able to refer you to classes, clinics, or books
on bicycle use, service, repair, and maintenance.
WARNING! It is essential for your safety that the assembly, maintenance, and
troubleshooting be performed by an Authorized Specialized Retailer. Before
your first ride, make sure your components, such as brakes and drivetrain,
are assembled and adjusted in accordance with the manufacturer’s
instructions and are functioning properly
WARNING! Many components on the Sirrus Carbon / Sirrus X Carbon,
including, but not limited to the frame, fork, kickstand, Future Shock, and
stem, are proprietary to the Sirrus Carbon / Sirrus X Carbon. Only use originally
supplied components and hardware at all times. The use of other components
or hardware will compromise the integrity and strength of the assembly. Sirrus
Carbon / Sirrus X Carbon specific components should only be used on the
Sirrus Carbon / Sirrus X Carbon and not on other bicycles, even if they fit.
Failure to follow this warning could result in serious injury or death.
WARNING! Never modify your frame or bicycle in any way. Do not sand,
drill, file, or remove parts from your bicycle. Do not install incompatible
components or hardware. Failure to follow this warning may result in serious
personal injury or death.
6 .1 TO O LS A N D TO R Q U E S P EC S
TOOLS REQUIRED FOR ASSEMBLY
4, 5, 6 mm HEX KEYS THREAD LOCKER COMPOUND
TORQUE WRENCH CARBON ASSEMBLY PASTE
GREASE
WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on
your bicycle is important for your safety. If too little force is applied, the
fastener may not hold securely. If too much force is applied, the fastener can
strip threads, stretch, deform or break.
Either way, an incorrect tightening force can result in component failure,
which can cause you to lose control and fall. Where indicated, ensure that
each bolt is torqued to specification. After your first ride, and consistently
thereafter, recheck the tightness of each bolt to ensure secure attachment of
the components.
The following is a summary of torque specifications in this manual:
LOCATION THREAD TOOL
TORQUE
NM IN-LBF
SEATPOST WEDGE
BINDER
M5 X 0.8 4 mm HEX 6.2 55
FUTURE STEM @ STEERER
TUBE
4 mm HEX 5 45
FUTURE STEM @
HANDLEBAR
4 mm HEX 5 45
DERAILLEUR HANGER 4 mm HEX 4.5 40
KICKSTAND BOLTS M6 X 1.0 5 mm HEX 8 71
DISC BRAKE MOUNTS M6 X 1.0
MANUFACTURER’S
SPECIFICATION
6 53
BLADE RACK MOUNT
(FORK)
M5 X 0.8
MANUFACTURER’S
SPECIFICATION
8 71
THRU-AXLES M12 X 1.0 6 mm HEX 15 133
DROPOUT FENDER
MOUNT (PLUG-AND-PLAY)
M5 X 0.8
MANUFACTURER’S
SPECIFICATION
2.8 25
CROWN RACK MOUNT
(FRONT)
M5 X 0.8
MANUFACTURER’S
SPECIFICATION
6 53