Specialized SIRRUS 1.0, Руководство пользователя

Страница: 11 / 13

11
IT
ES
PT
CNT
CNS
JP
KR
6 . 5 K I C KSTA N D
B
A
8
Nm
71
in-lbf
5
mm
6.5
Fig. 6.5
„
Align and hold the kickstand mount (A) against the mounting points on the inside of the
drive-side chainstay. Insert the M6x30 mm bolts (B) through the chainstay and into the
kickstand mount.
„
Using a 5 mm hex key, torque the bolts to 8 Nm / 71 in-lbf.
6 . 6 S EAT P O ST
B
C
D
A
6.2
Nm
55
in-lbf 4
mm
6.6
Fig. 6.6
SEATPOST INSTALLATION - SEAT WEDGE
„
Grease the bolt head and threads, as well as the mating wedge surfaces, then assemble
the wedge (A).
„
Slide the seatpost (B) into the seat tube (C) and insert the wedge assembly (A) into the
wedge cavity (D).
„
Adjust the saddle height and position.
„
Using a 4 mm hex key, torque the wedge bolt to 6.2 Nm / 55 in-lbf.
The fit between the seatpost and the seat tube must allow the seatpost to
slide into the seat tube smoothly and without twisting, but not so loosely
that there’s excessive side-to-side play/wiggle. Any fit and/or torque issues
should be inspected by your Authorized Specialized Retailer. If the seatpost
does not fit properly or moves in the frame even though it is torqued to spec,
you should have it inspected by your Authorized Specialized Retailer.