Specialized EPIC EVO Скачать руководство пользователя страница 4

1

1. INTRODUCTION

This user manual is specific to your Specialized Epic EVO bicycle. It contains important safety, 
performance and technical information, which you should read before your first ride and keep 
for reference. You should also read the entire Specialized Bicycle Owner’s Manual (“Owner’s 

Manual”), because it has additional important general information and instructions which you 
should follow. If you do not have a copy of the Owner’s Manual, you can download it at no 

cost at www.specialized.com, or obtain it from your nearest Authorized Specialized Retailer or 
Specialized Rider Care.
Additional safety, performance and service information for specific components such as 

suspension or pedals on your bicycle, or for accessories such as helmets or lights, may 
also be available. Make sure that your Authorized Specialized Retailer has given you all 
the manufacturers’ literature that was included with your bicycle or accessories. If there is 

a difference between the instructions in this manual and the information provided by the 
component manufacturer, please refer to your Authorized Specialized Retailer.
When reading this user manual, you will note various important symbols and warnings, which 
are explained below:

WARNING! The combination of this symbol and word indicates a potentially 

hazardous situation which, if not avoided, could result in serious injury or 

death. Many of the Warnings say “you may lose control and fall.” Because 

any fall can result in serious injury or even death, we do not always repeat 

the warning of possible injury or death.

CAUTION: The combination of the safety alert symbol and the word CAUTION 

indicates a potentially hazardous situation, which, if not avoided, may result in 

minor or moderate injury, or is an alert against unsafe practices.
The word CAUTION used without the safety alert symbol indicates a situation 

which, if not avoided, could result in serious damage to the bicycle or the 

voiding of your warranty.

INFO: This symbol alerts the reader to information which is particularly 

important.

GREASE: This symbol means that high quality grease should be applied as 

illustrated.

CARBON FRICTION PASTE: This symbol means that carbon friction paste 

should be applied as illustrated to increase friction.

TORQUE: This symbol highlights the correct torque value for a specific bolt. 

In order to achieve the specified torque value, a quality torque wrench must 

be used.

TECH TIP: Tech Tips are useful tips and tricks regarding installation and 

use.

1.1.  INTENDED USE

The Specialized Epic EVO is intended and tested for Mountain Bike (condition 3 - Cross-
country, Marathon, Hardtails) use only. For more information on intended use and structural 

weight limits for the frame and components, please refer to the Owner’s Manual.

1.2. WARRANTY

Please refer to the written warranty provisions provided with your bicycle, or visit 

www.

specialized.com

. A copy is also available at your Authorized Specialized Retailer.

Содержание EPIC EVO

























Отзывы: