Specialized 96522-8009, Руководство пользователя

Страница: 8 / 21

6
EN
FR
DE
ES
CNS
PT
A B
3.8
Fig. 3.8
General information:
„
Three (3) different Hex bits are provided with the torque wrench: 4 mm, 5 mm and 6 mm.
„
To use the torque wrench, determine which Hex bit is needed and insert it into the socket
on the torque wrench (A).
„
When there is no tension on the torque wrench lever arm, the right-side edge of the arm is
aligned with the small white line to the left of the "0" on the torque gauge (B).
PART POSITION TOOL TORQUE NOTES
Stem Faceplate bolts 4 mm Hex 5.2 Nm Torque with supplied wrench
Stem Steerer bolts 4 mm Hex 5.2 Nm Pre-torqued
Seatpost Seatpost clamp 4 mm Hex 6-7 Nm Torque with supplied wrench
Wheels Thru-axle 6 mm Hex 10 Nm Pre-torqued
3 . 2 . U S I N G T H E T O R Q U E W R E N C H
Your Riprock bicycle is supplied with a custom torque wrench which should be used to tighten
the bolts where indicated. It is important to properly use a torque wrench during assembly to
make sure all bolts are tightened to specification.
A B
E
D
C
3.7
DESCRIPTION DESCRIPTION
A LEVER B TORQUE GAUGE (0 - 10 NM)
C TORQUE POINTER D WRENCH SOCKET
E HEX BIT (4, 5, 6 MM)
Following are instructions on how to use the provided torque wrench. If after
reading the instructions you are still unsure of how to use the torque wrench,
please contact your Authorized Specialized Retailer for assistance.