Atlas™ Manual 15T and 25T Hydraulic Press
17
Tip:
This is a useful feature for pressing applications where a
maximum load limit is required. For example, 10 Tons maximum
for 13 mm evacuable pellet dies P/N GS03000.
Beware!
With the pressure relief valve set knob (
69
) turned fully
clockwise it is possible that the press will reach and go
beyond the maximum load rating for the press; that is beyond
the 15 and 25 ton gauge divisions. Therefore, the pressure
relief valve knob (
69
)
must
only be turned clockwise as far as
to obtain the 15 ton or 25 ton gauge division indication when
a maximum load is being applied.
Over pressurization of the pressure gauges will cause
damage to the gauge mechanism resulting in the need for
replacement.
Lead Screw Assembly
In operation the leadscrew assembly (handle (
20
) and leadscrew (
21
))
is used to adjust for the height of the work to be pressed. Rotating the
leadscrew clockwise lowers the leadscrew bolster (
23
) pressing face
towards the work and turning the leadscrew anticlockwise raises the
bolster (
23
) away from the work.
Fig 8. Leadscrew Assembly and Top Bolster Parts of the Press
The bolster (
23
) push fits into the hollow of the leadscrew (
21
) and is
retained by an O-ring (
22
).
Any pressing of work must always
be
carried out using the bolster (23) pressing face
suitably attached
into the leadscrew (
21
) assembly via the O-ring (
22
) fixing.
23
22
20
21
Содержание Atlas 15T
