User Manual
22
Retighten the bleed screw (
40
) and wipe away any expelled oil. Now
release the pressure from the system (open the pressure release
handle (
30
)) and remove the work from the press. Carefully replace the
pump block upper gasket (
38
) and the pump plate (
36
) and secure with
the four fixing screws.
The pump block assembly side of the press has now been primed and
purged of air in the oil. The press may now operate but it is advisable
to also purge the piston assembly side of the press.
Bleeding Air from the Piston Assembly
The pump block assembly side of the press should have already been
purged of air (see pages 20 to 21). If any trapped air remains in the
system, it will be in the piston assembly pressing side of the press.
Fig 12. Bleeding Air from Oil in the Piston Assembly
There is a second oil bleed screw (
6
) on the top of the piston (
4
).
Remove the lower bolster pressing face (
5
) on the piston, to gain
6
4
Содержание Atlas 15T
