Spearhead Twiga HXF 3300, Руководство/Перечень запасных частей

Страница: 9 / 27

Spearhead
Twiga HXF 3300
8
Safety recommendations
Beware of the following Potential Dangers associated with the use of
this machine

Becoming trapped when hitching or unhitching

Machine overbalancing when wing is raised (some machinetypes) .

Getting caught on rotating power take off (PTO)

Being hit or caught by any moving part, e.g. Blades, drive shaft and wings.

Being hit by flying debris or machine parts due to machine damage

Machine overbalancing when not in use (some machine types) .

Injection of high pressure oil from damaged couplings or hydraulic hoses

Accidents due to collision with other machines, or debris left on road

Beware of free-swinging blades over centering and falling when wings are folding
(some machine types) .
Always

Ensure the operator has read this handbook and has been trained to use the machine.

Ensure all safety guards are in place and all tractor windows closed.

Impact resistant shielding to the tractor is recommended

Before leaving the tractor cab always ensures that the wings are firmly on the ground,
no weight is on the machine’s hydraulics and the rotor has stopped spinning
(some
machine types) .

Check that all guards are properly fitted and there are no damaged or loose parts.
Particular attention should be given to the blades to ensure they are not damaged,
cracked or missing

Inspect work area for wire, steel posts, large stones and other dangerous materials and
remove before starting work.

Ensure that all warning labels are always visible and that they are not damaged,
defaced or missing.

Fit locking pins to height and to wings before transport and before unhitching when
applicable (some machine types) .

Wear ear defenders if operating without a quiet cab or with the cab windows open

Ensure tractor guards are fitted correctly and are undamaged

Work at a safe speed, taking into account terrain, passing vehicles and obstacles

Ensure that the tractor meets the minimum weight recommendations of the machine
manufacturer and that ballast is used if necessary

Check that machine fittings and couplings are in good condition

Follow the manufacturer’s instructions for attachment and removal of machine from the
tractor

Ensure blades are of the type recommended by the manufacturer, are securely fitted
and are undamaged

Ensure hydraulic pipes are correctly routed to avoid damage from chafing, stretching,
pinching or kinking (some machine types) .

Check condition of tyres and tightness of wheel nuts (some machine types) .

Ensure all blades have stopped spinning before folding wings into transport position
(some machine types) .