Spearhead Twiga HXF 3300, Руководство/Перечень запасных частей

Страница: 12 / 27

Spearhead
Twiga HXF 3300
11
Tool start

Chose low motor rpm

Make sure the area surrounding the tool is secure.

Varm start
– Start the tool.

Cold start
– never start at max rpm. Let the tool drive unloaded in appox. 15 min. To
warm the oil.

Slowly increase the rpm till the proper oil flow is achieved.

Do never try to restart an overworking tool. First remove the thing
there’s stuck tight.
Tool stop

Reduce engine rpm to idle speed. Then stop the tool.

Never increase or decrease the amount of oil to fast. It can in the long term damage the
hydraulic system.