Spearhead STARCUT 500, Быстрый старт

Страница: 8 / 8

Slip Clutch Settings ( Walterscheid )
1. Check the condition of the friction discs before
use and following periods of storage. Release the
tension from the spring, turn the clutch while
holding the P.T.O stationary. Or slip it using the
tractor for it. (On 730, first slip the outer clutch,
then the inner). Adjust the spring compression to
the original setting.
2. Following seasonal use, unload the spring
tension and store clutch assembly in a dry place.
Check condition of friction linings and reset
spring compression to original height before use.
3. Before season. See issue 1.
4. Should the assembly overheat due to frequent or
prolonged clutch slipping, dismantle for inspection.
Part
number
EDP CLUTCH NM
Spring
Height Qty
springs Qty
linnings Machine Postion
5770456 149839 K90/4 1200 38mm 6 4 500/730 centre
5770460 153788 K90/4 1200 38mm 6 4 500 wing
5770458 149837 K90/4 1200 38mm 6 4 730 outer wing
5770457 149838 K90/4 1600 37mm 6 4 730 inner wing
Spring Height