8999128: v1 03/09/2018
Page 1.4 of 1.12 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Sniper 600 SHD Flail Mower
This manual includes instructions for installation, use and maintenance of the Sniper 600 SHD flail mower in the
following sections.
The machine has been designed for use in the agricultural sector only, for shredding grass, the stalks of finished
crops, brush, growth on fallow land etc. The machine is drawn by the tractor by means of a three-point hitch and
works on the ground under its own weight and by virtue of rotating rotors that are driven by
the tractor‘s power
take-off by means of a PTO shaft connection. Any different use should be considered improper and therefore
potentially dangerous to the safety of the operator and any exposed persons. This manual is integral to the Sniper
flail mower, defines the purpose for which it was built and contains all the information required for proper and safe
use. Regular machine operation depends on its correct use and adequate maintenance: it is advisable, therefore,
to follow these instructions carefully to prevent any situation that could compromise the machine’s operation and
durability. It is also important to follow that which is described in this manual since Spearhead declines any liability
resulting from negligence of from not observing these norms, since it would result in the warranty being annulled.
It is mandatory
to verify upon delivery that the Sniper flail mower is integral and complete in all its parts. Any
complaints must presented in written within 8 (eight) days from receiving the machine. Spearhead can however be
contacted at any time for immediate and precise technical assistance and anything required for optimum operation
and maximum performance of the equipment. Upon receiving the product, carefully read the manual and carefully
follow the instructions contained in it.
IMPORTANT
All technical material or description in this manual is exclusively owned by Spearhead who prohibits
the complete or partial reproduction of the same unless written approval has been issued by the
Spearhead.
Data, illustrations and descriptions in the manual cannot be considered binding. Spearhead reserves
the right to make changes at any time that it considers to be suitable for improvement or for a
constructive or commercial requirement.
This manual reflects the state of techniques at the time of marketing the flail mower and cannot be
considered inadequate if updated at a later date due to modifications of related legal provisions.
Spearhead declines any and all liability for damages caused by the flail mower to persons,
animals or property, resulting from use other than that described in this manual, or due to
damage caused by negligence or by not observing the instructions contained in this manual.
The manual should be carefully stored in a suitable area to guarantee its physical integrity; it should
be easy to access by anyone authorised to consult it. The manual is an important document that
should accompany the flail mower and all users should be held responsible for safeguarding it.
For additional information or clarifications regarding anything contained in this manual, or if the
manual deteriorates, is destroyed or lost, using the flail mower is prohibited and it is mandatory to
request a new manual as soon as possible exclusively through:
Spearhead Machinery Limited
Green View, Salford Priors,
Evesham, Worcestershire, WR11 8SW
Direct download via Spearhead’s online PDF manual library
http://dealerinside.spearheadmachinery.com/dealerinside/manuallibrary/default.aspx
For technical enquiries email:
The following manual is an integral part of the product and must be stored carefully, in order
that it keeps its integrity and can be consulted repeatedly throughout the entire life of the flail
mower.
The flail mower is manufactured to conform to the provisions contained in Directive 2006/42/EC. It is
therefore equipped with EC marking and accompanied by the following EC conformity declaration.
