8999128: v1 03/09/2018
Page 2.2 of 2.5 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
2.3
Safety Decals
The flail mower is equipped with safety decals warning about residual risks present on the machine that were not
possible to eliminate. Figure 2.1 specifies the meaning of symbols contained in the decals. The operator must
memorise the meaning of these decals. The labels should always be kept clean and replaced immediately if they are
fully or partially detached or damaged.
1. WARNING - DANGER:
Ensure the hood is fitted to the
machine before commencing
work.
7. WARNING - DANGER:
Moving part hazard. Wait for moving
parts to stop.
2. ATTENTION
Do not perform adjustment and maintenance
work until you have read the operating and
maintenance manual, stopped the machine
and removed the key.
8. WARNING - DANGER:
Rotating tool hazard. Keep clear.
3. ATTENTION
Do not perform adjustment and maintenance
work until you have read the operating and
maintenance manual, stopped the machine
and removed the key.
9. LIFTING POINT
10. WARNING - DANGER:
Shear hazard. Keep hands clear.
4. ATTENTION
Use the required
Personal
Protective Equipment.
11. WARNING - DANGER:
Entanglement and dragging hazard.
Keep hands clear of drive shaft
while operating.
5. ATTENTION
Do not climb on the machine or allow anyone
to be carried on it.
12. WARNING - DANGER:
Crush hazard. Do not stand
between the tractor and the
implement.
6. WARNING
– DANGER:
Flying debris hazard. Keep clear.
13. WARNING - DANGER:
PTO shaft hazard: shaft rotates at
540 rpm.
Figure 2.1
Figure 2.2 shows an indication of the precise points on the machine where the safety decals and serial plate are usually
applied by the manufacturer.
