Spearhead SNIPER 600 SHD Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 50

Spearhead SNIPER 600 SHD Скачать руководство пользователя страница 25

8999128: v1 03/09/2018

Page 5.3 of 5.5 pages

Original instructions (ENGLISH)

Website: www.spearheadmachinery.com

5.2

Starting the machine

WARNING!

Before using the machine, gain familiarity with the controls and how they work. You must wear

suitable Personal Protective Equipment (PPE) when using, adjusting, servicing, repairing or handling the
machine; see Section 2.4.

DANGER!

Before starting work, make sure there are no people or animals within an 80m range; see Figure

. The machine must be used by a single operator sitting inside the driver‘s cab on the tractor. In addition,

before starting work, make sure ALL machine guards are intact and in perfect working order.

DANGER!

Bring the machine up to operating speed gradually. Start working once the power take-off is running

at full speed and gradually lower the machine into the work position. Do not run the machine under no-load
conditions unnecessarily. Do not accelerate suddenly with the power take-off engaged. This could be very
harmful to both the machine and tractor.

DANGER!

Do not operate the machine with the rear doors open for any reason. Rear doors should be opened

only for maintenance purposes with the machine not operating, and should be kept open only for as long as
strictly necessary.

WARNING!

Before starting work, always check that the rear door is closed and, if manually operated, that it is

fastened securely with the specially provided screws.

Figure 5.3

«
...
23
24
25
26
27
...
»

Содержание SNIPER 600 SHD



















































Отзывы:

Нет отзывов