background image

Spearhead OFFSET FLAIL MOWER 

 

 

 

16

 

 

The Spearhead Warranty 

 

Spearhead warrants that the Spearhead machine referred to in the Warranty Registration Form will be free from 
defects in materials and workmanship for a period of 12 months from the date of sale.  This warranty does not affect 
your statutory rights, but merely adds to them.  Should you have a problem within 12 months from the date of sale 
please contact your original Spearhead dealer, or Spearhead’s Service Department.  Any part found to be defective 
during this period would be replaced or repaired, at Spearhead’s discretion, by the dealer or a Spearhead Service 
Engineer.

 

 

Spearhead Warranty Conditions 

1.

 

The Warranty Registration Form must be completed and returned to Spearhead 
within 30 days of the date of sale.

 

 
2.

 

This warranty does not cover defects arising from fair wear and tear, willful damage, 
negligence, misuse, abnormal working conditions, use in competition, failure to follow 
Spearhead’s instructions (oral or written, including all instructions and 
recommendation made in the Operator’s Manual) or alteration or repair of the 
machinery without Spearhead’s approval.

 

 

3.

 

The machinery must have been serviced in accordance with the Operator’s Manual 
and the Service Log must have been kept up to date and made available to the 
dealer should service, repair or warranty work be undertaken.

 

 

4.

 

This warranty does not cover claims in respect of wearing parts such as blades, flails, 
paintwork, tyres, belts, hydraulic hoses, bearings, bushes, linkage pins, top links, ball 
ends unless there is a manufacturing or material defect or the cost of normal 
servicing items such as oils and lubricants.

 

 

5.

 

This warranty does not cover any expenses or losses incurred whilst the machinery is 
out of use for warranty repairs or parts replacement.

 

 

6.

 

This warranty does not extend to parts, materials or equipment not manufactured by 
Spearhead, for which the Buyer shall only be entitled to the benefit of any such 
warranty or guarantee given by the manufacturer to Spearhead.  Only genuine 
Spearhead replacement parts will be allowable for warranty claims.

 

 

7.

 

All parts replaced by Spearhead under warranty become the property of Spearhead 
and must be returned to Spearhead if Spearhead so request.  Such parts may only 
be disposed of after a warranty claim has been accepted and processed by 
Spearhead.

 

 

8.

 

Spearhead is not liable under this warranty for any repairs carried out without 
Spearhead’s written consent or without Spearhead being afforded a reasonable 
opportunity to inspect the machinery the subject of the warranty claim. Spearhead’s 
written consent must, therefore, be obtained before any repairs are carried out or 
parts replaced.  Use of non-Spearhead parts automatically invalidates the Spearhead 
Warranty.  Failed components must not be dismantled except as specifically 
authorized by Spearhead and dismantling of any components without authorization 
from Spearhead will invalidate this warranty.

 

 

9.

 

All warranty claims must be submitted to Spearhead on Spearhead Warranty Claim 
Forms within 30 days of completion of warranty work.

 

 

 

Using the machine implies the knowledge and acceptance of these instructions and 
 

 

 

the limitations contained in this Manual

 

Содержание Q1200-OS














































Отзывы: