Spearhead Q1200-OS, Руководство по эксплуатации и каталог запасных частей

Страница: 15 / 45

Spearhead OFFSET FLAIL MOWER
15
Torque Settings
Size: Tensile strength: Description: Torque setting - Nm.
M8 12.9 Pulley clamps 45
M10 8.8 General fasteners 65
M12 8.8 General fasteners 114
M16 8.8 Roller plate bolts 280
M14 10.9 Flail bolts 200
M24 8.8 Head stock bolts 950
Troubleshooting
Problem Cause Solution
Gearbox Overheating Oil level incorrect
Oil grade incorrect
Implement overloaded
Wrong P.T.O. speed Check oil level
Check oil grade
Reduce forward speed
Ensure tractor P.T.O. speed
matches implement.
Excessive Belt Wear Belt and Pulley condition
Pulley Alignment
Incorrect belt tension
Overloading of implement Replace if necessary
Check Alignment
Tension belts to spec.
Reduce forward speed or
increase height of cut.
P.T.O. wear UJ failure Working angle too great
Shaft incorrect length i.e.
Bottoming out
Lack of maintenance Reduce offset of implement
Resize P.T.O. shaft as
recommended
Grease P.T.O. shaft as
recommended.
Cut quality Flails worn
Rotor speed/Direction
Crop condition.
Replace worn flails
Check tractor P.T.O. speed
Look for suitable conditions.
Rotor bearing failure Rotor out of balance
Wire/string in bearing
Lack of maintenance
Water in bearing.
See rotor vibration
Replace bearings
Re-balance/replace rotor
Remove debris.