Spearhead 200F, Инструкция оператора

Страница: 4 / 45

8999124EN: v2.0 27/10/2021
4
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Destroyer Flail Flail Mulcher
This manual contains the instructions for installation, use and maintenance of the Destroyer Flail 200F Flail
mulcher hereafter more simply called the ''Mulcher.''
The Mulcher is designed and built to mulch branches, overgrown vegetation and logs up to 18 cm in
diameter. Any different use should be considered improper and therefore potentially dangerous to the safety
of the operator and any exposed persons. This manual is integral to the Mulcher, defines the purpose for
which it was built and contains all the information required for proper and safe use.
Regular machine operation depends on its correct use and adequate maintenance: it is advisable, therefore,
to follow these instructions carefully to prevent any situation that could compromise the machine’s operation
and durability. It is also important to follow that which is described in this manual since Spearhead declines
any liability resulting from negligence of from not observing these norms, since it would result in the warranty
being annulled.
It is mandatory to verify upon delivery that the mulcher is integral and complete in all its parts. Any
complaints must presented in written within 8 (eight) days from receiving the machine. Spearhead can
however be contacted at any time for immediate and precise technical assistance and anything required for
optimum operation and maximum performance of the equipment. Upon receiving the product, carefully read
the manual and carefully follow the instructions contained in it.
IMPORTANT
This operator’s manual should be regarded as part of the machine. Suppliers of both new and second-hand
machines are advised to retain documentary evidence that this manual was provided with the machine.
This machine is designed solely for ground vegetation control and must not be used for any other purpose.
Use in any other way is considered as contrary to the intended use. Compliance with, and strict adherence
to, the conditions of operation, service, and repair, as specified by the manufacturer, also constitute
essential elements of the intended use.
This machine should be operated, serviced, and repaired only by persons who are familiar with its
characteristics and who are acquainted with the relevant safety procedures.
Accident prevention regulations, all other generally recognised regulations on safety and occupational
medicine, and all road traffic regulations must always be observed.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any
resulting damage or injury.
It is potentially hazardous to fit or use any parts other than genuine Spearhead parts.
The company disclaims all liability for the consequences of such use which, in addition, voids the machine
warranty.