Spearhead 200F, Инструкция оператора

Страница: 28 / 45

8999124EN: v2.0 27/10/2021
28
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
4.2.2 Adjustment Of Working Height
Adjust the position of the skids so that the teeth do not come out of the plane made by the two skids. In this way,
even if there are irregularities in the ground, the teeth will not penetrate the ground itself. It is important to check
that the Mulcher is perfectly parallel to the ground in order to obtain perfect operation.
The adjustment must be carried out using the adjustable top link between the tractor and machine; Figure 11.
Figure 11
4.3 Using The Mulcher
After having familiarized yourself well with the controls, worn the PPE (personal protective equipment) required,
set the machine in the desired working position, and having connected the gearbox and secured it properly to
the tractor PTO by means of the input PTO shaft and hydraulic hoses to the tractor's hydraulic services, start the
tractor engine, disengage the parking brake, and engage the PTO while maintaining the engine at low rpm.
Before starting work, make sure that there are no exposed persons and/or animals near the machine. Otherwise,
have them move away.
On start-up, move slowly with the tractor, gradually and slowly lower the Mulcher until it reaches the ground.
Then, the engine can be brought to the work speed.
It is recommended not to press the accelerator pedal rapidly when the tractor is stationary, and the PTO is
engaged, and the Mulcher is not running. This can cause damage to the machine and the tractor.
The processed material is shredded correctly by maintaining the tractor at a low forward speed and the rotor
rotating at a constant speed.
N.B: Spearhead recommends that you always use a tractor equipped with a closed cab.
WARNING! The speed of the tractor with the Mulcher working must never exceed 5km/h in order to
avoid breakage or damage.