38
39
AFTER SALES SUPPORT
0345 605 2067
AFTER SALES SUPPORT
0345 605 2067
CHAIN AND BAR LUBRICATION
Adequate lubrication of the chain saw during cutting operations
is essential to minimize friction with the guide bar. Your chain
saw is equipped with an automatic oiler system. The oiler
automatically delivers the proper amount of oil to the bar and
chain. The oil tank level can be checked in the oil inspection
window (A) provided on the right side of the saw. The tank is full
when oil is at the top of the slot.
CAUTION:
Never starve the bar and chain of
lubrication oil. Running the saw DRY or with TOO
LITTLE OIL will decrease cutting efficiency, shorten
chain saw life, and cause rapid dulling of the chain
and excessive wear of the bar from overheating.
Too little is evidenced by smoke or bar discoloration.
NOTE:
The chain saw stretches during use,
particularly when it is new, and occasional
adjustment will be needed. A new chain requires
more frequent adjustment during the break-in
period. This is normal. See Section chain saw
Tension Adjustment instructions.
MAINTENANCE
To help protect the environment, please dispose of the product
properly when it has reached the end of its useful life and not in
the household waste. Information on collection points and their
opening hours can be obtained from your local authority. Faulty
or used batteries / rechargeable batteries must be recycled in
accordance with Directive 2006/66/EC and its amendments.
Please return the batteries / rechargeable batteries and / or the
product to the available collection points.
DISPOSAL
