AFTER SALES SUPPORT
01904 727505 www.spearandjackson-power.com
www.spearandjackson-power.com
AFTER SALES SUPPORT
01904 727505
8
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
9
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
■
Only use an extension cord with conductors
of not less than 1.5mm² or 2.0mm² and:
– if rubber insulated, ordinary tough rubber
sheathed flexible cord (code designation
60245 IEC 53);
– if polyvinyl chloride insulated, ordinary
polyvinyl chloride sheathed flexible cord
(code designation 60227 IEC 53).
■
Do not expose the product to rain.
■
Disconnect the product from the power
supply (i.e. remove the plug from the power
supply or the battery pack) and check for
damage after use.
■
Disconnect the product from the power
supply (i.e. remove the plug from the power
supply or the battery pack) before carrying
out maintenance or cleaning work.
■
Use only the manufacturer’s recommended
replacement parts and accessories.
■
Inspect and maintain the product regularly.
Have the product repaired only by an
authorised service centre or similar quali
specialist.
■
When not in use, store the product out of the
reach of children.
MAINTENANCE AND STORAGE SAFETY
This lawnmower is designed for domestic
use only:
Any use of the machine that deviates from its
intended use and is not included in these.
INTENDED USE
Preparation
■
Never operate the product while people,
especially children, or pets are nearby.
■
Wear eye, ear and mouth protection at all
times while operating the product
Operation
■
Use the product only in daylight or good
artificial light.
■
Never operate the product with damaged
guards or shields or without guards or
shields in place.
■
Keep hands and feet away from the cutting
attachment at all times and especially when
switching on the motor.
■
Before use check the controls and correct
operation of the product.
■
Before using the product or after any
impact, check for signs of wear or damage
and repair as necessary.
■
Always disconnect the product from the
power supply (i.e. remove the plug from the
power supply or the battery pack)
– before clearing a blockage;
– before checking, cleaning or working on
the product
– after striking a foreign object;
– whenever the product starts vibrating
abnormally.
■
Take care against injury to feet and hands
from the cutting attachment.
– whenever leaving the product
unattended;
■
Always ensure that the air vents are kept
clear of debris.
■
Never use replacement parts or accessories
not provided or recommended by the
manufacturer.
■
The product should be supplied via a residual
current device (RCD) with a tripping current
of not more than 30 mA.
■
Avoid using the product in bad weather
conditions especially when there is a risk of
lightning.
■
Position the cord so that it will not be caught
by the cutting attachment during operation.
■
Disconnect from the power supply when the
cord becomes damaged or tangled.
■
If the cord becomes damaged during
use, disconnect the cord from the supply
immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
■
Do not use the product if the cord is
damaged or worn.
■
Warning! The cutting elements continue to
move after the product is switched off.
■
Keep the extension cord away from the
blades at all times.
■
This electric lawnmower is intended for
mowing lawns in domestic and hobby
gardens.
■
This product is not to be used in wet
weather conditions and may not be used to
mow wet or unusually high grass, e. g.
pasture grass or for shredding leaves.
■
This product is intended for private domes-
tic use only, not for any commercial trade
use. It must not be used for any purposes
other than those described.
Local regulations can restrict the age of the
operator.
■
Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their property.
Service
■
Have your power tools serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
