29
AFTER SALES SUPPORT
0345 605 2067
MAINTENANCE
HOW TO REPLACE THE CHAIN
1.Pull the chain-brake back and ensure that it has been
released. (the chain cover can only be removed with the
chain-brake disengaged)
2. Then loosen the chain cover tighten wheel and the chain
cover
3. Fit the chain around the bar ensuring that the direction
of the chain is as depicted in the picture on the bar. Fit
the chain on the sprocket. Adjust the position of chain
tensioner so the tensioner pin locates in the hole (A) on
the bar.
4. Adjust the tension to ensure that there is not too much
slack in the chain. Make sure the tensioner pin (B) is
located in the assembly hole (A) on the bar. Pay attention
to the correct direction of the saw chain. Compare with
the picture near the chain sprocket and the picture on
the bar.
Direction of chain
A
B
a
1
2
