Names of Each Control
7
Note:
To simplify explanations, instructions refer to names of buttons and controls on
the front panel, making no mention of the use of remote control unit.
The equipment draws nominal non-operating power from the AC outlet with
its POWER switch in the OFF position.
A
REMOTE SENSOR
When operating the STTR remote control unit, point it towards the REMOTE
SENSOR.
B
STANDBY indicator
This indicator lights when the unit is in the standby mode.
When the unit is turned on, it goes off.
C
POWER switch
Press this switch to turn the unit on or off.
D
FM button, AM button
Use these buttons to select FM or AM.
E
FM MODE button
Use this button to select stereo or monaural.
F
PRESET button
Use this button to select the preset tuning mode.
G
DIRECT button
Use this button to select the manual tuning mode.
You can use the numeric buttons to directly input frequency numbers.
H
MEMORY button
Use this button to store preset channels into memory.
I
TUNING/PRESET buttons
Use these buttons to tune in a station.
J
Numeric buttons
These buttons are used either to input frequency numbers or to select preset
stations.
K
Display
Names of Each Control