11
Specifications
FM Tuner Section
(Without notes 98.1 MHz, 65 dBf)
Tuning Range . . . . . . . . .87.5 MHz – 107.9 MHz (200 kHz steps)
Usable Sensitivity (IHF) . . . . . . . . . . . . . . . . . . . . . . . .Mono: 15 dBf
50 dB Quieting Sensitivity . . . . . .Mono: 21 dBf , Stereo: 41 dBf
Total Harmonic Distortion (1 kHz) . . Mono: 0.3%, Stereo: 0.4%
Frequency Response . . . . . . . . . . . . . . . . 30 Hz – 15 kHz, ±1.5 dB
Stereo Separation (1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 dB
Signal-to-Noise Ratio . . . . . . . . . . . . Mono: 67 dB, Stereo: 63 dB
AM Tuner Section
Tuning Range . . . . . . . . . . . . 530 kHz – 1,710 kHz (10 kHz steps)
Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 dB/m
Total Harmonic Distortion . . . . . . . . . . . . . . . . . . . 1% at 85 dB/m
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . 40 dB at 85 dB/m
General
Power requirements . . . . . . . . . . . . . . . . . . . . . . . . .120 V AC, 60 Hz
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 W
Dimensions (W x H x D) . . . . . . . . . . . . . . . . . . 435 x 95 x 270 mm
(17-1/8" x 3-3/4" x 10-5/8")
Weight (net) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 kg (8-13/16 lbs)
Standard Accessories . . . . . . . . . . . . . . . Remote Control Unit x 1
Battery (AAA, R03, UM-4) x 2
AM Loop Antenna x 1
FM adapter x 1
RCA Cord x 2
•
Improvements may result in specifications and features
changing without notice.
•
Illustrations may differ slightly from production models.
SpeakerCraft Inc. warrants to the original retail purchaser only that
this SpeakerCraft product will be free from defects in materials and
workmanship for a period of two years, provided the product was
purchased from a SpeakerCraft Authorized Dealer.
Defective products must be shipped, together with proof of pur-
chase, prepaid insured to the SpeakerCraft Authorized Dealer from
whom they were purchased, or to the SpeakerCraft factory at the
address listed on this installation instruction manual. Freight collect
shipments will be refused. It is preferable to ship this product in the
original shipping container to lessen the chance of transit damage.
In any case, the risk or loss or damage in transit is to be borne by
the purchaser. If upon examination at the Factory or SpeakerCraft
Authorized Dealer it is determined that the unit was defective in
materials or workmanship at any time during this warranty period,
SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its
option, repair or replace this product at no additional charge, except
as set forth below. If this model is no longer available and can not
be repaired effectively, SpeakerCraft, at its sole option may replace
the unit with a current model of equal or greater value. In some
cases where a new model is substituted, a modification to the
mounting surface may be required. If mounting surface modifica-
tion is required, SpeakerCraft assumes no responsibility or liability
for such modification. All replaced parts and product become the
property of SpeakerCraft Inc. Products replaced or repaired under
this warranty will be returned to the original retail purchaser, within
a reasonable time, freight prepaid.
This warranty does not include service or parts to repair damage
caused by accident, disaster, misuse, abuse, negligence, inadequate
packing or shipping procedures, commercial use, voltage inputs in
excess of the rated maximum of the unit, or service, repair or modifi-
cation of the product which has not been authorized or approved by
SpeakerCraft. This warranty also excludes normal cosmetic deterio-
ration caused by environmental conditions. This warranty will be void
if the Serial number on the product has been removed, tampered
with or defaced.
This warranty is in lieu of all other expressed warranties. If the prod-
uct is defective in materials or workmanship as warranted above, the
purchaser’s sole remedy shall be repair or replacement as provided
above. In no event will SpeakerCraft be liable for any incidental or
consequential damages arising out of the use or inability to use the
product, even if SpeakerCraft Inc. a SpeakerCraft Inc. Authorized
Dealer has been advised of the possibility of such damages, or for
any claim by any other party. Some states do not allow the exclusion
or limitation of consequential damages, so the above limitation and
exclusion may not apply.
All implied warranties on the product are limited to the duration of
this expressed warranty. Some states do not allow limitation on the
length of an implied Warranty. If the original retail purchaser resides
in such a state, this limitation does not apply.
Warranty
Limited 2-Year Warranty
