25
SpeakerCraft – 1-800-472-5555 – 1-707-778-5733
16 CHANNEL, FULLY CONFIGURABLE POWER AMPLIFIERS
CONFIGURATION AND SETUP TOOL
EQUALIZATION MAIN SELECTION –
MANUAL EQ SELECTION
Choose the Manual EQ sub-selection and the Manual EQ page is displayed. The
amplifier channels are included in a single pull down list along with their names.
Note:
If an odd numbered channel is set to 100 watts, its even numbered
adjacent channel will not be included in the pull down list (e.g. when channel 15
is set to 100 watts, channel 16 will not be included in the pull down list).
1. Choose a channel from the pull down list to adjust its EQ parameters.
The current Room EQ Preset is displayed for the selected channel.
If any manual adjustments are made and saved, the room preset display
changes to “None”.
2. Select or deselect Loudness, Low Cut or High Cut and use the individual
arrow buttons to adjust volume, bass, midrange, treble, midrange center
frequency and midrange bandwidth for the selected channel.
3. Copy EQ Settings saves all manual EQ parameters for the selected channel
to a clipboard including loudness, low cut, high cut, volume, bass, midrange,
treble, midrange center frequency and midrange bandwidth.
4. Paste EQ Settings applies the saved clipboard settings to any
other selected channel.
5. Set Flat sets the selected channel to the default Flat Room EQ Preset
and volume at 0dB.
6. Select Save to save
Manual EQ settings to
the amplifier’s memory.
FIGURE 14
