© Copyright 2013 by Conrad Electronic SE.
V1_1013_02-ETS-Mkde
These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
Maintenance and cleaning
• Before cleaning, disconnect the product from the connected devices and unplug it from the
power outlet.
• There are no components located inside the product you need to maintain. Never open/
dismantle the product.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much pressure
to the housing as this may cause scratch marks.
• You can easily remove dust using a long-haired, soft and clean brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
a) HDMI splitter
Input.................................................. 1 x HDMI
Outputs ............................................. 2 x HDMI
Bandwidth ......................................... 10.2 Gbit/s
Frequency ......................................... 25 – 340 MHz
Colour depth ..................................... 12 Bit
Supported video resolution ............... 480i – 1080p (50/60 Hz)
..........................................................
1080p (24/50/60 Hz)
..........................................................
VGA – UXGA
..........................................................
4K x 2K (30 Hz)
Supported standards ........................ HDCP
..........................................................
Full 3D
..........................................................
LPCM 7.1CH
..........................................................
Dolby TrueHD
..........................................................
DTS-HD Master Audio
..........................................................
DVI 1.0
Operating conditions ......................... 0 to +40 ºC, 20 – 90 % RH (non-condensing)
Storage conditions ............................ -20 to +60 ºC, 20 – 90 % RH (non-condensing)
Dimensions (W x H x D) ................... 88 x 25 x 52 mm
Weight .............................................. 74 g
b) Power adaptor
Input voltage / current ....................... 100 – 240 V/AC, 50/60 Hz, max. 250 mA
Output voltage / current .................... 5 V/DC, 1000 mA
Cable length ..................................... 1.4 m
