5
4. Installation guidelines
The ALP Series installation kit contains the following:
A) UV lamps
B) Aluminium reflectors.
C) Clip for lamp holding
D) Ballast for each lamp.
E) 5 metre wire length (standard)
F) Gaynor boot and plug one each per lamp.
G) Warning Labels.
H) Aluminium fixtures (optional at extra cost)
The kit will have the correct fixtures as per the
selection of UV lamps and size.
Tools required will be:
1) Allen key set
2) Screw driver
3) Electric tester
Steps to follow for installation of optional fixtures:
1. Fit the angles on the Aluminium channels with
the help of screws provided. Refer figure a & b
Figure a.
Figure b.
2. Mark the position of Aluminium channels to
be fixed on AHU floor as per location shown in
selection sheet.
3. Fit the Aluminium channels with angle on the
floor and top panel.
4. Screw the clips on the Aluminium reflector to
hold the UV lamps. Refer figure c
Figure c
5. Fit the Aluminium reflectors as per height
location shown in selection sheet.
6. Fit the UV lamp on reflector. Refer figure d.
Figure d