SPC ALP Series Скачать руководство пользователя страница 3

3

1. Safety instructions

SPC believes in a policy of Safety first. We recommend all of our customers who are in direct or indirect 

use of our product to read the safety instructions first before installation, use of product and performing 

planned or unplanned maintenance or service.

Graphic symbols

Warnings

Like all florocent lamps, UV lamps contain small quantity of mercury. If the / a lamp breaks, 

clean and dispose of with care.

Never expose eyes or skin to ultraviolet light from any source. The purifier must be 

disconnected from its power source before performing maintenance or service. Personal injury 

may result if this is not done.

Do not touch the lamp glass without gloves or reduced performance of the lamp may result. 

Clean lamps with a dry cloth after handling.

UV rays may destroy certain type of filters (polymer or plastic), please protect filters 

from direct exposure to UV rays.

Use only specified replacement lamps with UV sterlizer units. Use of incorrect lamps can 

result in damage to the UV system and / or lamps.

Indicates operations that can be dangerous for people and / or disrupts the correct 

operation of the equipment.

Indicates prohibited operations.

Indicates important information that the operator must follow in order to guarantee 

the correct operation of the equipment in complete safety.

Содержание ALP Series









Отзывы: