Spaun Electronic SMK 99122 F, Технические рекомендации

Страница: 6 / 12

Specifications and design are subject to change due to our policy of continual technical improvement.
104982/04.12
Technical Advice
for the DiSEqC-multiswitch Premium-Class
SMS 9982 NFI and for the cascadable
multiswitches SMK 99xxF
Byk-Gulden-Str
. 22 · D-78224 Singen
Phone: +49 (0) 7731 - 8673-0 · Fax: +49 (0) 7731 - 8673-17
Email: contact@spaun.com · www
.spaun.com
Always remove mains cable before opening the device!
Please follow the safety instructions enclosed!
Important: please observe the following instructions !
• The equipment described is designed solely for
use in installation of satellite receiver systems.
• Any other use, or failure to comply with these
instructions, will result in voiding of warranty cover.
• The equipment may only be installed in dry indoor
areas. Do not mount on or against highly combustible
materials.
• The safety regulations in accordance with EN 60728-11
and EN 60065 must be observed.
• Fixings: Wood screws, max

: 4,5 mm
• Connector: Screw coupling 75

(series F) to
EN 61169-24.
• Unused subscriber and trunkline connections should
be terminated by 75 Ohm resistors (e.g. ZFR 75 DC).
SPAUN electronic confirms the keeping of the EMC
requirements in accordance to the EU product norm
EN 50083-2 and the keeping of the safety requirements
in accordance to the EU product norm EN 60728-11 by
the CE sign.
The multiswitches meet the more stringent screening
requirements according to EN 50083-2, quality grade A.
All components are equipped with an earthing
terminal for connecting to the main potential
equalization.
The multiswitches support DiSEqC level 2.0. Bi-directional
communication between receiver and multiswitch is
possible. DiSEqC Address: 14 Hex.
Electrical and electronic equipment are not household
waste
- in accordance with the European directive EN
50419 (corresponds to the article 11(2) of the guideline
2002/96/EC) of the European Parliament and the Council of
January, 27th 2003 on used electrical and electronic equip-
ment, it should be disposed properly. Please, on the end
of its life cycle, take this unit and dispose it on designated
public collection points.
Free circulation of air must be possible to discharge the
heat emitted by the unit. Risk of overheating!
Permissible ambient temperature -20 ...+50° C