www.spatz-tech.de
6.2 Rear Panel
IR IN
SER VIC E
R L
RS232
COAX AUD IO
AUDIO
CON TROL
POWER
HDMI 1
HDMI 2
P C/HD
HDMI 1 HDMI 2 HDMI 3
PC 1
PC 2
PC 3
Cr/Pr Cb/P b
Y R L CV
DC 5V
1
IR IN:
Plug in the IR extender cable for IR signal receiving from the
included remote control.
2
SERVICE:
Reserved for firmware upgrades
3
RS-232:
Connect with PC/Laptop and use RS-232 command to control the
device.
4
OUTPUT:
HDMI 1 & 2:
Connect to HDMI display or amplifier for video and
audio display.
COAX:
Connect to active speaker or amplifier for audio output in
digital format.
AUDIO
: Connect to active speaker or amplifier for audio output in
stereo format.
PC/HD:
Connect to monitor/display for video output display. For
HD output, use D-Sub 9-pin to 3 RCA adaptor cable for output HD
timing from 480p~1080p.
NOTE:
This output is disabled with HDCP encrypted sources.
5
INPUT:
HDMI 1~3:
Connect to HDMI source equipments such as Blu-ray/
DVD player for both video and audio signal sending.
PC 1~3:
Connect with PC/Laptop source equipments for video
signal input with D-Sub 15-pin cable.
Audio L/R:
Connect to source equipment’s L/R output
corresponding to the input port below with 3.5Ø phone jack.
The priority audio input of HDMI is from HDMI, only when HDMI input
has no audio signal the L/R audio will be inserted into.
YCbCr/YPbPr + L/R:
Connect to source equipment such as video/