www.spatz-tech.de
6.7 Telnet Control
Before attempting to use the telnet control, please ensure that both
the Scaler (via the 'LAN port) and the PC/Laptop are connected to
the active networks. To access the telnet control in Windows 7, click
on the "Start" menu and type "cmd" in the Search field then press
enter. Under Windows XP go to the "Start" menu and click on "Run",
type "cmd" with then press enter. Under Mac OS X, go to Go→Applica
tions→Utilities→Terminal See below for reference.
Once in the command line interface (CLI) type "telnet", the IP address
of the unit you wish to control.
Note: The IP address can be found from OSD menu under Information.
