USER’S MANUAL
EN
10
Duty cycle
(def.)
Duty cycle is the time during which You can weld or cut at a certain load without causing overload.
It is expressed in percent for period of complete cycle which equals 10 minutes. For example: 60% duty
cycle means that for 6 minutes device can operate at given load, after that required 4 minutes time
break (no-load operation). Duty cycle is given to ambient temperature of 40°C.
Protection against overheating
(def.)
Security system from overheating will turn on when the device is over-heat (possibility of work
is turned off, abnormal indicator on front panel lights up). In such a situation, You should not turning
off the unit immediately. Wait some time until fan cools the unit. Time to return to the state from
overheating can take up to approx. 15 minutes.
The device has a degree of protection IP21S. Which means that it is intended to be used in closed and
covered areas and suitable for use outdoors. However it is not designed to be used outdoor during
precipitation if it is not covered.
6.2 TECHNICAL PARAMETERS
ProCUT 45PFC
Input
~1 x 230V ±10% 50/60 Hz
Cutting current[A]
20 – 40
Max. cutting thickness [mm]
25
Duty cycle [%]
60
Output working voltage [V]
18
Recomended work pressure [bar]
5
Recomended compressor efficiency [l/min]
150
Post gas
✓
Contactless pilot arc ignition (no HF)
✓
2T / 4T
✓
Current consumpiton [A]
19.7
Power factor [cosφ]
0.7
Insulation class
H
Protection class
IP21S
Weight [kg]
14
Dimensions [mm]
600 × 215 × 405
7. INSTALLATION AND USE
WARNING!
SPARTUS
®
ProCUT 45PFC machine is intended for professional and industrial applications.
Installation and use of the device may only be carried out appropriately trained professionals.
Qualified person
(def.)
A person who has gained the relevant technical education, training took place and / or gained
experience to perceive the risk and avoid hazards during use of the product (IEC 60204-1).
