Spartus 101X, Руководство пользователя

Страница: 14 / 20

USER’S MANUAL
EN
12
6.1 REPLACING THE FILTERS COVERS
Regular replacement of the filter welding shield is needed to do the correct operation of the
helmet. Excessively worn or damaged filter covers must be replaced by a new one.
6.1.1 Replacing outer filter cover
Step 1: Carefully remove the filter cartridge. In order to remove the cartridge from the welding
filter gently loosen the locking tabs.
Step 2: Replace protective plate for the new one.
Step 3: Place the filter cassette in welding helmet, and then lock the latch.
x
z
6.1.2 Replacement of the internal protective glass
Step 1: Unlock the latch on both sides of the glass
x
,
z
.
Step 2: Remove the used protective glass.
Step 3 : Install a brand new protective glass by pushing it into the
appropriate latches on both sides of the helmet.
6.2 CHANGING BATTERY IN THE HELMET
Use lithium batteries CR2450 3V.
6.3 CLEANING INSTRUCTIONS
Clean the welding filter and protection/cover plates with lint-free tissue or
cloth. Do not immerse in water or spray directly with liquids.
7. LIST OF SPARE PARTS OF HELMETS
WARNING!
Use only original parts of the helmet, supplied by an authorized retailer or an authorized service.
Unauthorized modifications and spare parts can expose the user to the risk of injury.