Spartherm Australia Freestander, Инструкция по эксплуатации

Страница: 21 / 24

21
630564_1
Elevating mechanisms, operation
devices such as handles, adjustment
leavers, shock absorbers, electronic
and electrical components such as
exhausters, governors, and safety
devices
2 Years*
Fireclay bricks / vermiculite, fire
grates, seals and glass**
6 months*
* From date of purchase
** Fireclay Bricks / vermiculite: These are natural products subjected to
expansion and contraction during the heating process. This may create
cracks. For as long as the linings remain in position in the fire chamber
and do not break up, they remain fully functional and hence not subject to
warranty claims.
1.2 Escea must pre-authorise all warranty work.
1.3 The benefits provided by under this warranty are in addition to the
consumer guarantees and any other statutory rights you may have under
the consumer law and/or other applicable laws.
2.0 Warranty Exclusions
2.1 This warranty does not apply and will be void where:
2.1.1 The Spartherm fire is not installed in accordance with AS/NZS
2918:2001 and any building code and consent.
2.1.2 The Spartherm fire has not been installed or operated in
accordance to the Spartherm installation manual, in particular,
defects, malfunctions or failures caused by incorrect
installation, normal wear and tear, misuse, neglect, lack of
proper and regular maintenance, accidental damage any other
alteration, or failure to follow operating instructions in the
installation manual or any misuse that causes an overfired
situation resulting in heat damage.
2.1.3 The use of products, including flue systems that are not
specified in accordance with installation manual.
2.1.4 Installation of the fireplace, repairs or modifications by persons
not authorised by Escea, use of parts not supplied by Escea, or
damage or other events which have occurred since the product
left the control of Escea.
2.1.5 Any scratches, dints, finger print marks and melted items that
occurred after the arrival of the product to the Spartherm
Dealer.
2.1.6 Discolouration of the enamel, galvanized surfaces or glass
caused by soiling by soot or built-in residues of burnt materials
as well as visibly changed colour or other aspects due to
thermal stress, or overload.
2.1.7 If the installation and operating instructions are not followed
resulting in the overheating of the pulleys and bearings.
2.1.8 Improper handling of fragile components such as glass.
2.1.9 Damage caused by incorrect use or the burning of treated
or painted wood, driftwood or other fuels which are not
recommended.
2.1.10 Changes in the interior / exterior surfaces of the house, fire
or flue (e.g. any staining or soot / smoke damage, cracking,
discoloration or degradation of surfaces caused by thermal
stress).
2.1.11 Damage caused by abnormally corrosive environments (e.g. sea
salt corrosion).
2.1.12 Damage caused by water affecting the Spartherm fire.
2.1.13 Operation of the Spartherm fire without its fire clay bricks,
vermiculite, door seals, fire grates, complete glass doors in
place or partly open doors will create an overfired situation
resulting in damage, which will not be covered by warranty.
2.1.14 Spartherm wood fires are coated with high temperature paint
that may show signs of surface rust if exposed to moisture for
an extended period of time. Escea reserve the right to prep and
paint a brand new fire that has just been delivered rather than
supplying a new fire in the rare event any rust is present. Any
subsequent rust damage is not covered by warranty.
2.1.15 This warranty does not cover paint blemishes or imperfections
because of the uneven nature of high temperature paint. A
spray can of touch up Spartherm paint is available and can be
purchased from your Spartherm dealer.
2.1.16 Subject to any statutory provisions to the contrary, at Escea’s
discretion, Escea’s liability in respect of Spartherm products