Spartherm Australia Freestander, Инструкция по эксплуатации

Страница: 12 / 24

12
630564_1
5.0 OPERATION
DO NOT MODIFY THIS APPLIANCE.
BURN WELL SEASONED WOOD ONLY (LESS THAN 25%
MOISTURE).
ALWAYS OPERATE THIS APPLIANCE WITH THE DOOR CLOSED
AND LATCHED EXCEPT DURING START UP AND RE-FUELING.
ALWAYS WEAR GLOVES TO PREVENT INJURY.
DO NOT LEAVE THE FIRE UNATTENDED WHEN THE DOOR
IS UNLATCHED OR WHEN USING A SPARK SCREEN AS
UNSTABLE WOOD COULD FALL OUT OF THE FIRE CHAMBER
CREATING A FIRE HAZARD TO YOUR HOME.
NEVER EVER, NOT EVEN FOR A BRIEF MOMENT, LEAVE
CHILDREN UNATTENDED WHEN THERE IS A FIRE BURNING
IN THE APPLIANCE.
NEVER USE GASOLINE, GASOLINE-TYPE LANTERN FUEL,
KEROSENE, CHARCOAL LIGHTER FLUID, OR SIMILAR LIQUIDS
TO START OR ‘FRESHEN UP’ A FIRE IN THIS APPLIANCE.
KEEP ALL SUCH LIQUIDS WELL AWAY FROM THE APPLIANCE
WHILE IT IS IN USE.
OBJECTS PLACED IN FRONT OF THE APPLIANCE SHOULD
MAINTAIN A SAFE DISTANCE.
OPEN AIR CONTROL (AND DAMPER WHEN FITTED) BEFORE
OPENING FIRING DOOR.
HOT WHILE IN OPERATION: KEEP CHILDREN, CLOTHING AND
FURNITURE AWAY.
WEAR SUITABLE GLOVES TO OPERATE YOUR APPLIANCE.
NEVER OPERATE THE STOVE WITH THE GRATE COVER
REMOVED.
DO NOT POKE OR STIR THE LOGS WHILE THEY ARE BURNING.
AVOID RISK OF BURNS. REMOVE OPERATIONAL TOOL AFTER
USE!!!
BRIEF CONTACT MAY CAUSE SKIN BURNS.
Your Spartherm product is designed with the most advanced technology. The
appliance is extremely airtight.
The first fire(s) in your appliance may be difficult to get going and keep going
with a lesser amount of heat being generated. This is a result of the moisture
being driven out of the fire brick. Allow several hours of hot fires before your
appliance will perform optimally.
During the break-in period (the first 2 or 3 fires) create only small, hot fires
using kindling or small wood pieces; this will allow the firebrick to cure.
Do not be alarmed if small hairline cracks develop in the firebrick. This is a
normal occurrence and does not pose a safety hazard.
The paint may also smell for the first few fires as it cures and it is
recommended to open a door or window to alleviate the smell.
Traditional Method of Lighting a Fire (Bottom Up):
To start, a brisk fire is required. Place loosely crumpled paper on the floor
of the appliance and cover with dry kindling. Open the draft control fully (if
available) by moving the lever to the right. Fully open the flue damper if this
is an option. Light the paper and leave the door slightly ajar (25mm) until all
kindling is burning.
To maintain a brisk fire, a hot ember bed must be established and maintained.