SPARTACO Huskie Tools PRO LINE 7 Series, Руководство по эксплуатации

Страница: 4 / 16

SpartacoGroup.com 800-860-6170
4
SAFETY
Battery and Charger Use and Care
• Before using battery charger, read all instructions and cautionary markings on battery charger, battery
pack, and product using battery pack.
• To reduce the risk of injury, charge only Huskie Tools Battery Pack model BP-185. Other
types of batteries may burst causing personal injury and damage.
• Do not leave charger and battery pack exposed to rain or snow, submerge in water, or stored in damp or
wet locations.
• To reduce risk of damaging the electric plug and cord, pull by plug rather than cord when disconnecting
charger.
• Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage
or stress.
• Do not disassemble charger or battery pack, contact Huskie Tools service dept. at 800-860-6170 when
service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
• Do not store the tool and battery pack in locations where the temperature may reach or exceed 50°C
(122°F) (such as a metal tool shed, or a car in the summer), which can lead to deterioration of the storage
battery.
• Do not charge battery pack when the temperature is BELOW 0°C (32°F) or ABOVE 40°C (104°F). This is very
important to maintain optimal condition of the battery pack.
• The charger is designed to operate on standard 120V AC electrical power only. Do not
attempt to use it on any other voltage.
• Charge the battery pack in a well ventilated place, do not cover the charger and battery pack with a cloth,
etc., while charging.
• Use of an attachment not recommended may result in a risk of fire, electric shock, or personal injury.
• Do not short the battery pack or allow metal objects to touch the terminals. A battery short
can cause a large current flow, over heating and create the risk of fire or personal injury.
• Huskie Tools is not responsible for any damage or accident caused by the use of recycled or counterfeit
battery pack.
• Do not incinerate the battery pack or dispose of the battery pack in a fire, or expose it to excessive heat.
• Do not charge the battery pack in a high-temperature location, such as next to a fire or in direct sunlight.
Otherwise, the battery may overheat, catch fire, or explode.
• After removing the battery pack from the tool or the charger, always re-attach the pack cover. Otherwise,
the battery contacts could be shorted, leading to a risk of fire.
• When the Battery Pack Has Deteriorated, Replace It with a New One. Continued use of a damaged battery
pack may result in heat generation, ignition or battery rupture.
• When storing, remove any material cuttings and dust from the battery pack, and place the battery pack
separately from metal objects (screws, nails, etc.) when storing in the tool case.